News — Toyota Vellfire

Steering Column Toyota Vellfire ANH10 Power Steering Column Rack and Pinion Power Steering System Steering Gears Shaft Self-Steering Assembly Today's power steering components are designed to operate smoothly and consistently. If you notice that the steering wheel is rough when you turn, or if you feel a "pop” in the steering wheel as you turn, the problem is typically caused by a restriction inside the steering column. There are multiple gears and gaskets that allow the steering system to work correctly inside of the steering column. Driveshaft and steering rack specialist since 1980 www.singspareparts.sg Freddy Lim +65 8013 9793 http://wa.me/80139793...

Steering Rack Toyota Vellfire ANH20 Power Steering Rack and Pinion Power Steering System Steering Gears Shaft Self-Steering Assembly Occasionally you'll notice that your steering wheel will make jerking movements or sudden turns to the left or right when not directed by you. This is typically the sign of loose bearings in the steering rack and the result of the steering rack literally moving without input.  Obviously this is a potentially dangerous situation that could lead to an accident, so if you notice your steering wheel moving on its own, contact us as soon as possible. Driveshaft and steering rack specialist...

Drive Shaft Toyota Vellfire GGH20 Reconditioned Driveshaft CV Joint (Constant Velocity Joint)   A CV joint that has become worn out from being used too much will cause a knocking sound. This noise can come from the inner joint on a front-wheel drive car. For rear-wheel drive, it can come from either the outer or inner joints. Knocking sounds can also come from the differential gears.  Driveshaft and steering rack specialist since 1980 www.singspareparts.sg Freddy Lim +65 8013 9793 http://wa.me/80139793 www.singspareparts.sg The only company in Singapore with more than 40 years of experience

Steering Rack Toyota Vellfire AGH30 Power Steering Rack and Pinion Power Steering System Steering Gears Shaft Self-Steering Assembly The rack and pinion gear set has two main functions: Conversion of the steering wheel's rotational motion into the linear motion needed for the vehicle's wheels to turn. Reduction of gears, which makes it easier for the steering wheel to turn the wheels Driveshaft and steering rack specialist since 1980 www.singspareparts.sg Freddy Lim +65 8013 9793 http://wa.me/80139793

Drive Shaft Toyota Vellfire Driveshaft CV Joint (Constant Velocity Joint) Why is grease coming out of my CV joint?  A grease leak is probably the most common sign of a failing CV boot. Over time, the rubber CV boot can become dry or brittle, creating cracks or tears. When this happens the boot will leak grease onto the inside of the wheel. Driveshaft and steering rack specialist since 1980 www.singspareparts.sg Freddy Lim +65 8013 9793   http://wa.me/80139793