News — Mercedes Benz Steering Rack

Steering Rack Mercedes Benz WDD117 Power Steering Rack and Pinion Power Steering System Steering Gears Shaft Self-Steering Assembly There are a few ways you can tell if your steering gear is failing, such as excess noise, movement, effort or leaks. When you're turning the steering wheel and it seems to be looser or tighter than the rest of the rack, you could have a flat spot or notch in the steering. Give us a call, bring your car down, we’ll conduct a FOC check to address the problem and fix the problem for you.  Driveshaft and steering rack specialist since...

Steering Rack Mercedes Benz B180 Power Steering Rack and Pinion Power Steering System Steering Gears Shaft Self-Steering Assembly As the steering rack and pinion gear spins in concert with your steering column, it causes the steering rack to move from side to side. Over time, the exposed position of the steering rack often causes it to suffer damage and wear. Eventually, the rack may cease to perform appropriately which is why it’s important to check regularly and we provide free of charge checks.  Driveshaft and steering rack specialist since 1980 www.singspareparts.sg Freddy Lim +65 8013 9793 http://wa.me/80139793 www.singspareparts.sg The only...

Steering Rack Mercedes Benz E250 Power Steering Rack and Pinion Power Steering System Steering Gears Shaft Self-Steering Assembly If the steering rack fails completely, then major issues occur. The most important thing that happens if the steering rack completely goes out is that you will lose control of the car. If a pinion or other part of the steering system fails completely, then again you can lose complete control of the steering, Before it happens, get them fixed at Sing Spare Parts Co.    Driveshaft and steering rack specialist since 1980 www.singspareparts.sg Freddy Lim +65 8013 9793 http://wa.me/80139793 www.singspareparts.sg The...

Drive Shaft Mercedes Benz B200 WDD245 Driveshaft CV Joint (Constant Velocity Joint) An unbalanced driveshaft causes a vibration that increases with vehicle speed. The driveshaft can become damaged or dented. Undercoating, mud, or a missing balance weight cause the driveshaft to spin out of balance. It results in a vibration that increases with vehicle speed. Freddy Lim +65 8013 9793 http://wa.me/6580139793 www.singspareparts.sg The only company in Singapore with more than 40 years of experience

Steering Rack Mercedes Benz GLC250 WDC253 Power Steering Rack and Pinion Power Steering System Steering Gears Shaft Self-Steering AssemblyWhen should tie rods be replaced? When your vehicle is parked, turn your steering wheel back and forth, and if you hear a clunking noise, your tie rod ends may be loose or worn. Two other signs of bad tie rods include front-end vibrations and noise. Also, if your steering wheel doesn't return to center, you should have your tie rods checked at Sing Spare Parts Co.Freddy Lim+65 8013 9793http://wa.me/80139793www.singspareparts.sgThe only company in Singapore with more than 40 years of experience