News — Hyundai

Steering Column Hyundai Avante DU41 Power Steering Column Rack and Pinion Power Steering System Steering Gears Shaft Self-Steering Assembly Anytime you steer a vehicle, the steering wheel should automatically return to zero degree level or the center when you are finished making a turn. This is a safety feature that was introduced with power steering. If the steering wheel does not automatically go to center when the wheel is released, it's most likely caused by a blockage inside the steering column or a broken gear inside the unit. Driveshaft and steering rack specialist since 1980 www.singspareparts.sg Freddy Lim +65 8013...

Drive Shaft Hyundai I45 Reconditioned Driveshaft CV Joint (Constant Velocity Joint) What is the difference between axle and shaft?  The shaft is used for rotary motion while the axle is used for linear or angular motion. The shaft is used to transmit power at a short distance while the axle transmits power at long distance. The shaft can be meant for balancing or transferring torque while the axle is meant for balancing or transferring bending moment. Before it happens, get them fixed at Sing Spare Parts Co.  Driveshaft and steering rack specialist since 1980 www.singspareparts.sg Freddy Lim +65 8013 9793...

  Drive Shaft Hyundai Elantra Reconditioned Driveshaft CV Joint (Constant Velocity Joint) What happens if you choose the wrong drive shaft length? Drive shaft length is very important. The function of the slip yoke is to compensate for suspension movement. A shaft that is too long can bottom-out the slip yoke in the trans, causing damage. A shaft that is too short doesn’t provide the yokes needed support and has potential to bind.  Having a hard time in determining which one is the right one for your car? We got you covered! Get your drive shaft to be replaced or...